{"title":"Camera Mounts","description":"\u003cp\u003eMotorcycle camera mounts let you capture every ride from the perfect angle, whether you're documenting a cross-country tour, recording track days, or building footage for your channel. Designed to secure action cameras like GoPro, Insta360, DJI Osmo, and Sony to virtually any part of your bike or helmet, these mounts deliver vibration-resistant stability at highway speeds while keeping your hands free and focus on the road.\u003c\/p\u003e\n\u003cp\u003eShop our complete selection of motorcycle camera mounts, including handlebar clamps, mirror mounts, fork stem mounts, swingarm and rear axle brackets, fuel tank suction mounts, and chin-bar or side-helmet adapters. We also carry tether kits, anti-vibration dampers, ball-joint adapters, and quick-release bases for fast camera swaps between rides. Built from aluminum, stainless steel, and reinforced polymers for all-weather durability, these mounts fit cruisers, sportbikes, adventure bikes, and dirt bikes alike, helping every rider record sharp, stable, broadcast-quality footage from a unique point of view.\u003c\/p\u003e","products":[{"product_id":"selfie-stick-ring-mount","title":"Insta360 Selfie Stick Ring Mount","description":"\u003cp\u003eThe Insta360 Selfie Stick Ring Mount is one of those small accessories that doesn't get a lot of glory, but if you've ever had a selfie stick wobble loose mid-ride, you'll appreciate exactly what this thing does. We recommend it for any rider running an Invisible Selfie Stick on a bike — it's cheap insurance for your camera setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRing-Shaped Stabilizer Design:\u003c\/strong\u003e Adds a second contact point to lock down your selfie stick under hard riding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduces Wear on Connection Points:\u003c\/strong\u003e Spreads load away from threaded joints to extend the life of your gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for High-Speed and Rough Terrain:\u003c\/strong\u003e Built for the chatter and vibration of real motorcycle riding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight, Compact Build:\u003c\/strong\u003e Adds stability without adding bulk or wind drag.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick, Tool-Light Install:\u003c\/strong\u003e Includes an L-shaped wrench — five minutes and you're locked in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless Integration with Insta360 Gear:\u003c\/strong\u003e Designed to work with the existing Insta360 motorcycle ecosystem.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Materials:\u003c\/strong\u003e Built to outlast the rest of your mount stack.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is the kind of accessory that experienced motovloggers always end up adding to their kit after they've had one too many \"where did my camera go?\" moments on a back road. The Selfie Stick Ring Mount works by giving your selfie stick a second anchoring point, so the threaded joint isn't carrying the entire load when you're hammering through chop or running highway speeds. The ring shape distributes vibration across a wider footprint, which means less wear on your gear and dramatically less risk of your stick slowly unscrewing itself loose during a ride. Installation is fast — pop it on, tighten it down with the included wrench, and you're done. It's compatible with the Insta360 Action Invisible Selfie Stick and other Insta360 accessories, so it slots right into the system you're already running. For 20 bucks, it's some of the best peace-of-mind insurance in the entire Insta360 motorcycle lineup.\u003c\/p\u003e","brand":"Insta360","offers":[{"title":"Default Title","offer_id":48134169526517,"sku":"5003-0006-01","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7283\/1477\/files\/0aa3e63d-df06-466e-a4e7-f03c8b9f6bba.jpg?v=1780134323"},{"product_id":"motorcycle-u-bolt-mount","title":"Insta360 Motorcycle U-Bolt Mount","description":"\u003cp\u003eThe Insta360 Motorcycle U-Bolt Mount is the rock-solid handlebar solution for riders who want third-person follow shots that look like they were filmed by a chase drone. We sell a lot of these to long-distance touring riders and adventure folks because they hold up to genuine abuse on rough roads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum \u0026amp; Zinc Alloy Construction:\u003c\/strong\u003e Built tough enough for daily abuse on touring rigs and ADV bikes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes U-Bolt + Spacers:\u003c\/strong\u003e Fits a wide range of handlebar diameters straight out of the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4\" Thread Compatibility:\u003c\/strong\u003e Works with the Action Invisible Selfie Stick and most Insta360 accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefreshed Patented Gimbal Structure:\u003c\/strong\u003e New design delivers unprecedented stability for motorcycle shots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Bike Compatibility:\u003c\/strong\u003e Mounts cleanly on most motorcycle handlebars and round bar accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake-Free Footage:\u003c\/strong\u003e Locks the camera in place even when you're hammering broken pavement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePairs with Invisible Selfie Stick:\u003c\/strong\u003e Unlocks blockbuster third-person ride shots when you stack the two.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're going to mount a 360° camera to your bike, the U-Bolt Mount is one of the most stable, foolproof solutions out there — and it's the foundation for those signature Insta360 follow-cam shots you've probably seen on Reels and TikTok. The trick is pairing it with the Action Invisible Selfie Stick: clamp the U-Bolt to your handlebars, run the stick out the side or rear, and the 360° camera at the end of it gives you that impossible drone-following-the-bike perspective with nothing visible holding it up. The included U-bolt and spacer system means it'll fit just about any handlebar you bring it, and the all-metal aluminum-and-zinc construction means it shrugs off vibration that would loosen a cheaper plastic mount. Whether you're a daily commuter, a weekend canyon hunter, or a cross-country touring rider, this mount is the workhorse base for serious motorcycle camera work. We sell it standalone and as part of larger kits, but it's the foundational piece that almost every advanced motorcycle camera setup ends up including in some form.\u003c\/p\u003e","brand":"Insta360","offers":[{"title":"Default Title","offer_id":48134169755893,"sku":"5003-0014-03","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7283\/1477\/files\/d7887215-e519-407f-a62d-dadd813cae43.jpg?v=1780134338"},{"product_id":"quick-release-mount-2-0","title":"Insta360 Quick Release Mount 2.0","description":"\u003cp\u003eThe Insta360 Quick Release Mount 2.0 is a serious upgrade for riders running multiple shooting setups. If you swap your camera between your helmet, bike, chest rig, and tripod regularly, this mount turns a 30-second job into a 2-second snap.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgraded Magnetic Quick Release:\u003c\/strong\u003e Stronger hold than the original — locks tight under real-world riding stress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-Free Mounting:\u003c\/strong\u003e No nuts, no wrenches, no fiddling — just snap on, click, and shoot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Interface (1\/4\" + 2-Prong):\u003c\/strong\u003e Switch instantly between Insta360's two main mount standards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim, Low-Profile Design:\u003c\/strong\u003e Stays hidden in 360° footage for clean immersive shots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSliding Lock Mechanism:\u003c\/strong\u003e Secondary lock keeps the camera firmly seated even at speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAce Series + X Series Compatible:\u003c\/strong\u003e One adapter for your whole Insta360 lineup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for Motorcycle Use:\u003c\/strong\u003e Engineered for confident, secure mounting on bars, helmets, and bikes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Avoid use with X5 or in heavy-impact off-road situations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're running more than one Insta360 setup — say, a chin mount on the helmet and a U-bolt on the bars — the Quick Release Mount 2.0 is the accessory that turns multi-mount shooting from a chore into something you'll actually do mid-ride. The upgraded magnetic system has noticeably stronger pull than the original, and the secondary sliding lock means you're not relying solely on magnets to keep your $600 camera attached to your bike at 75mph. The dual-interface design is the real game-changer here — Insta360 cameras and accessories use both 1\/4\" threads and the 2-prong mount system, and trying to switch between them used to involve carrying multiple adapters. Now you've got both interfaces in one slim, low-profile mount that disappears in 360° footage. For riders who want to capture multiple angles per ride or who switch between bikes regularly, this is one of the most useful accessories in the entire ecosystem.\u003c\/p\u003e","brand":"Insta360","offers":[{"title":"Default Title","offer_id":48134169952501,"sku":"5003-0015-00","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7283\/1477\/files\/d64dc45a-9b69-4a8e-b3df-f5a654ccebd9.jpg?v=1780134352"},{"product_id":"rear-view-mirror-mount","title":"Insta360 Rear View Mirror Mount","description":"\u003cp\u003eThe Insta360 Rear View Mirror Mount is one of those genius little accessories that opens up brand new shot angles you didn't know you wanted. Clamp it to your bars, your mirror stalks, or any round bar in that 6–15mm range, and you've got a fresh perspective every time you ride.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts on 6–15mm Round Bars:\u003c\/strong\u003e Clamp design fits most mirror stalks, accessory bars, and small handlebar sections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Steel + Reinforced Plastic:\u003c\/strong\u003e Durable build that handles daily commutes and long touring days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact, Lightweight Design:\u003c\/strong\u003e Adds fresh shot angles without adding weight to your cockpit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-Slip Rings Included:\u003c\/strong\u003e Locks the mount firmly in place, no creeping or rotating mid-ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Tool-Light Install:\u003c\/strong\u003e Tightens down fast with no fuss — get back to riding sooner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Camera Angle:\u003c\/strong\u003e Dial in exactly the perspective you want for third-person POV shots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePairs with Invisible Selfie Stick:\u003c\/strong\u003e Stack with a stick for epic offset and side-angle ride shots.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is one of the most creative mounts in the Insta360 motorcycle lineup, and we genuinely have a hard time keeping these in stock once riders see what they unlock. The Rear View Mirror Mount lets you grab footage from angles a standard handlebar mount just can't reach — outside the bike line, off your mirror stalks, or off any small-diameter accessory bar on your fairing. That offset perspective is what gives content creators those striking, professional-looking ride shots that stand out in a sea of generic forward-facing GoPro footage. The 6–15mm clamp range is purposeful — it's specifically designed for the kind of round bars and mirror stems found across most production motorcycles. Stainless steel construction means it doesn't rust out after a wet season, and the included anti-slip rings keep your mount precisely where you set it through vibration and weather. For the price of takeout, it's one of the easiest ways to level up the variety in your ride content.\u003c\/p\u003e","brand":"Insta360","offers":[{"title":"Default Title","offer_id":48134170149109,"sku":"5003-0016-00","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7283\/1477\/files\/dfc1084d-7dfe-4d92-8ff6-596f21161f95.jpg?v=1780134364"},{"product_id":"helmet-chin-mount-2-0","title":"Insta360 Helmet Chin Mount 2.0","description":"\u003cp\u003eThe Insta360 Helmet Chin Mount 2.0 is the gold-standard solution for capturing pure first-person motorcycle POV footage. We hand this one to riders who tell us they want their viewers to feel exactly what they're seeing through the visor — and the chin mount delivers that better than any other angle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered for Full-Face Helmets:\u003c\/strong\u003e Designed to attach securely to the chin bar of most full-face lids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight Low-Profile Design:\u003c\/strong\u003e Doesn't throw off helmet balance or interfere with riding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-Slip Construction:\u003c\/strong\u003e Locks the camera in place under vibration, hard braking, and aggressive riding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuthentic First-Person POV:\u003c\/strong\u003e Captures exactly what you see — handlebars, dash, road ahead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Setup, Easy Removal:\u003c\/strong\u003e Mount it for the ride, pop it off when you're done.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Insta360 Camera Support:\u003c\/strong\u003e Compatible with X3, X4 Air, X5, Ace Pro 2, and more.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for Road or Trail:\u003c\/strong\u003e Equally at home on street, adventure, or off-road riding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you've ever watched a motovlog and wondered how the rider got that gorgeous, immersive POV looking right down the tank and over the bars, chances are it was filmed from a chin mount. The Helmet Chin Mount 2.0 is Insta360's purpose-built solution for that exact shot — and it's significantly more secure and lower-profile than DIY adhesive or strap setups. The 2.0 version has a refined attachment system that holds the camera tighter under hard riding while still being quick to remove between sessions. It's lightweight enough that you barely notice it on the helmet, which matters more than people realize on long rides where a poorly balanced mount can cause neck fatigue. Compatible with the full Insta360 X Series and Ace Series, it slots right into your existing setup. For motovloggers, instructional riders, or anyone who wants their viewers to actually feel the ride, this is the chin-mount you reach for.\u003c\/p\u003e","brand":"Insta360","offers":[{"title":"Default Title","offer_id":48134170345717,"sku":"5003-0017-00","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7283\/1477\/files\/f155c2db-2a6d-4c72-9894-1fc3ab085962.jpg?v=1780134385"},{"product_id":"helmet-mount-kit","title":"Insta360 Helmet Mount Kit","description":"\u003cp\u003eThe Insta360 Helmet Mount Kit is the all-in-one helmet solution for riders who want maximum mounting flexibility. Top, side, or chin — this kit puts the choice in your hands depending on which shot you're chasing that day.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Position Mounting:\u003c\/strong\u003e Attach to the top, side, or chin of your helmet for varied POV angles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved + Flat Adhesive Bases:\u003c\/strong\u003e Includes both base shapes for compatibility with virtually any helmet shell.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInvisible Selfie Stick Support in 360° Mode:\u003c\/strong\u003e Mount a 360 cam on a stick for clean, drone-like helmet shots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Insta360 Compatibility:\u003c\/strong\u003e Works with the full Insta360 camera lineup; pair with Action Mount Adapter for GO 2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Safety Tether:\u003c\/strong\u003e Backup strap protects your camera if the adhesive ever lets go.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Sport Ready:\u003c\/strong\u003e Just as good for skiing, mountain biking, and other helmet sports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3M Adhesive Bases:\u003c\/strong\u003e Stick to a clean, dry surface and let cure 24 hours for max hold.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is the kit we recommend when a rider tells us they want to experiment with helmet angles before committing to a single mounting style. The included curved and flat 3M adhesive bases mean you can stick a mounting point on essentially any modern helmet — full-face, modular, open-face, even ski lids. The real magic comes when you mount a 360° camera on a short selfie stick attached to the top of your helmet: in 360 mode, the stick disappears and you get that floating drone-cam look that pairs incredibly well with motorcycle riding. The included safety tether is the kind of thing you don't think about until you need it — it acts as a backup if the adhesive ever fails, which is the kind of insurance that's worth its weight when you're traveling at speed. For best results, stick the bases to a clean, dry helmet surface and wait 24 hours before mounting a camera so the 3M cures fully. Versatile, well-thought-out, and a solid value for the variety it unlocks.\u003c\/p\u003e","brand":"Insta360","offers":[{"title":"Default Title","offer_id":48134170476789,"sku":"5003-0019-00","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7283\/1477\/files\/ea901973-b211-42ca-ab5d-615e7916ff95.jpg?v=1780134390"},{"product_id":"go-3-go-3s-in-helmet-pov-mount","title":"Insta360 GO 3\/GO 3S In-Helmet POV Mount","description":"\u003cp\u003eThe Insta360 GO 3\/GO 3S In-Helmet POV Mount is purpose-built for one of the coolest shots in motorcycle content: true rider's-eye footage filmed from inside the helmet looking out. We get a lot of questions about how to get this look, and this mount is the answer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue First-Person In-Helmet POV:\u003c\/strong\u003e Captures exactly what you see — your line of sight as you ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Compact 17g, 2\" Diameter:\u003c\/strong\u003e Fits inside most motorcycle helmets without crowding your head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGO 3 + GO 3S Compatible:\u003c\/strong\u003e Designed specifically for Insta360's thumb-sized action cameras.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWind Noise Reduction with Visor Down:\u003c\/strong\u003e Riding closed-visor naturally protects your audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Security: Shark-Fin Insert + Velcro + Safety Cord:\u003c\/strong\u003e Three layers of attachment so the camera stays put.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Mounting Angle:\u003c\/strong\u003e Adapts to different helmet liner structures and shell shapes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic GO 3S Attachment:\u003c\/strong\u003e Snap the camera into place via the existing magnet system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsed by MotoGP Champion Marc Márquez:\u003c\/strong\u003e The exact in-helmet setup he uses for his own ride content.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn-helmet POV is the holy grail of motorcycle content because it gives viewers a perspective that feels genuinely immersive — like they're sitting on the bike themselves. Until recently, getting this shot meant either taping a tiny camera to your liner or rigging up something custom. The In-Helmet POV Mount changes that. It's tiny, light enough that you barely notice it in the helmet, and the three-layer security system (shark-fin insert that wedges into your liner gap, velcro lining for grip, and a safety cord as a backup) keeps a lightweight GO 3S camera locked exactly where you put it. When you ride visor-down, the helmet itself acts as a natural wind guard, so your audio comes through much cleaner than externally-mounted cams. Insta360 recommends mounting the GO 3S facing slightly downward in the lower part of the helmet to avoid blocking your view. It's the cleanest, most legitimate in-helmet POV solution we've seen.\u003c\/p\u003e","brand":"Insta360","offers":[{"title":"Default Title","offer_id":48134170607861,"sku":"5003-1713-00","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/7283\/1477\/files\/da23e245-b905-4ed5-a4ea-81e8f7607e5a.jpg?v=1780134395"}],"url":"https:\/\/helmetshop.com\/collections\/camera-mounts.oembed","provider":"The Helmet Shop","version":"1.0","type":"link"}